######### Back to overview
Showroom - Knauf   Showroom - Knauf   Showroom - Knauf
         
Showroom - Knauf   Showroom - Knauf   Showroom - Knauf
         
Showroom - Knauf   Showroom - Knauf   Showroom - Knauf
         
Knauf

Knauf - Material Data

 

Front elevation  

Wet room interior solution

  • Wet room interior solution Following assembly from the outside to the inside: 5 mm ceramic tiles white, 5 mm tile adhesive, AQUAPANEL® Cement Board Indoor, primer, 2 x OSB panels
    22 mm, fastening with AQUAPANEL® Joint Adhesive und AQUAPANEL® Maxi Screws
  • Interior solution, cladding with two layers, following assembly from the outside to the inside: Knauf Diamant (Knauf gypsum plasterboard, preformed longitudinal edges with HRAK-edges), Knauf vapour barrier LDS; Knauf Diamant, Knauf Insulation
    80 mm; Metal profiles Knauf CW75 and UW75 (stud frame)

 

Characteristics  

AQUAPANEL ® Cement Board Indoor is waterproof, rigid and impact resistant, fire resistance category A1 (not flammable). .

 

Rear elevation  

Exterior Wall System

  • Exterior Wall - Knauf AQUAPANEL® plaster system (following assembly from the outside to the inside: white plaster, primer, exterior basecoating, reinforcement mesh),
    AQUAPANEL® Cement Board Outdoor (ACB), Knauf Insulation and plate anchors, anchor elements AQUAPANEL® VHF, aluminium load bearing substructure
  • Stud frame system , directly cladded with panels from outside ACB Outdoor, Knauf AQUAPANEL® plaster system, the same as (1), AQUAPANEL® Cement Board Outdoor,
    AQUAPANEL® Tyvek® Stucco WrapTM, Knauf Insulation 100+50, metal profile Knauf CW150 and UW150 (stud frame

 

Characteristics

Physical properties can be adjusted according to requirements by modification of system components, fire resistance category A1 (not flammable), earthquake-proof construction due to the lower weight than static dead load.

 

 

Material Data Sheet [PDF]