######### Back to overview
Showroom - Evonik   Showroom - Evonik   Showroom - Evonik
         
Showroom - Evonik   Showroom - Evonik   Showroom - Evonik
         
Showroom - Evonik    
Evonik

Evonik - Material Data

 

Front and side elevation 1

PLEXIGLAS®  Mineral, solid surface material for cladding of rear ventilated curtain facades

  • PLEXIGLAS® Mineral, solid surface material 10mm,
    round corner 90°element, thermoformed,
    element height 2780 mm, silky smooth satin
    finished surface
  • PLEXIGLAS® Mineral, solid surface materials Mineral BV and Mineral NF, silky smooth satin finished surface, concealed fixed by undercut

 

Front elevation

  • Facade element of a designed-surface
    PLEXIGLAS® Mineral cover layer and  an insulation system combining a vacuum insulation panel (VIP)
    with insulating material Calostat®, thickness approx. 90 mm
  • PLEXIGLAS® Mineral, solid surface materials Mineral BV and Mineral NF, high gloss surface, concealed fixed by undercut

 

Fixings   

Concealed fixing by undercut and adhesion on standard aluminium or wooden substructure, visible fixing (rivet / screw) also possible 

 

Characteristics  

Storey-high facade elements, maximum panel sizes with standard thicknesses of 6 – 12 mm up to 3050 x 2030 mm (larger and thicker on request), single panels can be welded to oversize panels without visible joints, 3-dimensional and round corner elements by high deformation behavior, different kind of structured surfaces with thermal treatment possible, homogeneous colourisation effects causes same coloured edges, 

fire behaviour according to DIN 4102 Plexiglas® “B1” “not easy normal flamable” up to “B” “normal flamable” and Cs1 d0 according to DIN EN 13501, insulating material Calostat® “A” “non-combustible”

 

 

Material Data Sheet [PDF]